Linux Files and Directories

1.1 Listing files and directories

ls (list)

When you first login, your current working directory is your home directory. Your home directory has the same name as your user-name, for example, jwilliams, and it is where your personal files and subdirectories are saved.

From now on, for the sake of brevity, we will use the simple prompt % in textual explanations. The figures will always use this prompt for the user tutorial. To find out what is in your home directory, type

% ls (short for list)

The ls command lists the contents of your current working directory.

There may be no files visible in your home directory, in which case, the prompt will be returned. Alternatively, there may already be some files inserted by the System Administrator when your account was created. For instance, the result  of the ls command could be

ls does not, in fact, cause all the files in your home directory to be listed, but only those ones whose name does not begin with a dot (.) Files beginning with a dot (.) are known as hidden files and usually contain important program configuration information. They are hidden because you should not change them unless you are very familiar with Linux!!!

To list all files in your home directory including those whose names begin with a dot, type

% ls -a

ls is an example of a command which can take options: -a is an example of an option. The options change the behavior of the command. There are online manual pages that tell you which options a particular command can take, and how each option modifies the behavior of the command. (See later in this tutorial)

1.2 Making Directories

mkdir (make directory)

We will now make a subdirectory in your home directory to hold the files you will be creating and using in the course of this tutorial. To make a subdirectory called unixstuff in your current working directory type

% mkdir unixstuff

To see the directory you have just created, type

% ls

1.3 Changing to a different directory 

cd (change directory)

The command cd directory means change the current working directory to 'directory'. The current working directory may be thought of as the directory you are in, i.e. your current position in the file-system tree.

To change to the directory you have just made, type

% cd unixstuff

Type ls to see the contents (which should be empty)

Exercise 1a

Make another directory inside the unixstuff directory called backups

1.4 The directories . and ..

Still in the unixstuff directory, type

% ls -a

As you can see, in the unixstuff directory (and in all other directories), there are two special directories called (.) and (..)

In Linux, (.) means the current directory, so typing

% cd .

NOTE: there is a space between cd and the dot

means stay where you are (the unixstuff directory).

This may not seem very useful at first, but using (.) as the name of the current directory will save a lot of typing, as we shall see later in the tutorial.

(..) means the parent of the current directory, so typing

% cd ..

will take you one directory up the hierarchy (back to your home directory). Try it now.

Note: typing cd with no argument always returns you to your home directory. This is very useful if you are lost in the file system.

1.5 Pathnames

pwd (print working directory)

Pathnames enable you to work out where you are in relation to the whole file-system. For example, to find out the absolute pathname of your home-directory, type cd to get back to your home-directory and then type

% pwd

The full pathname will look something like this -

/home/jbartlett

which means that jbartett(your home directory) is in the directory home (the directory containing all user accounts).

 

Exercise 1b

Use the commands ls, pwd and cd to explore the file system.

(Remember, if you get lost, type cd by itself to return to your home-directory)

1.6 More about home directories and pathnames

Understanding pathnames

First type cd to get back to your home-directory, then type

% ls unixstuff

to list the consents of your unixstuff directory. For instance, if you are in the directory /etc, get back to your home directory and list unixstuff as follows:

Now type

% ls backups

You will get a message like this -

backups: No such file or directory

The reason is, backups is not in your current working directory. To use a command on a file (or directory) not in the current working directory (the directory you are currently in), you must either cd to the correct directory, or specify its pathname. To list the contents of your backups directory without changing into it, you must type

% ls unixstuff/backups

~ (your home directory)

Home directories can also be referred to by the tilde ~ character. It can be used to specify paths starting at your home directory. So typing

% ls ~/unixstuff

will list the contents of your unixstuff directory, no matter where you currently are in the file system.

What do you think

% ls ~

would list?

What do you think

% ls ~/..

would list?

Summary

ls	list files and directories
ls -a	list all files and directories
mkdir	make a directory
cd directory	change to named directory
cd	change to home-directory
cd ~	change to home-directory
cd ..	change to parent directory
pwd	display the path of the current directory

Commonly Used Commands

2.1 Copying Files

cp (copy)

cp file1 file2 is the command which makes a copy of file1 in the current working directory and calls it file2

What we are going to do now, is to take a file stored in an open access area of the file system, and use the cp command to copy it to your unixstuff directory.

First, cd to your unixstuff directory.

% cd ~/unixstuff

Then at the prompt, type,

% cp /opt/examples/linux-tutorial/science.txt .

(Note: Don't forget the dot (.) at the end. Remember, in Linux, the dot means the current directory.)

The above command means copy the file science.txt to the current directory, keeping the name the same.

(Note: The directory /opt/examples/linux-tutorial/ is an area to which everyone has read and copy access.

Exercise 2a

Create a backup of your science.txt file by copying it to a file called science.bak

2.2 Moving files

mv (move)

mv file1 file2 moves (or renames) file1 to file2

To move a file from one place to another, use the mv command. This has the effect of moving rather than copying the file, so you end up with only one file rather than two.

It can also be used to rename a file, by moving the file to the same directory, but giving it a different name.

We are now going to move the file science.bak to your backup directory.

First, change directories to your unixstuff directory (can you remember how?). Then, inside the unixstuff directory, type

% mv science.bak backups

Type ls and ls backups to see if it has worked.

2.3 Removing files and directories

rm (remove), rmdir (remove directory)

To delete (remove) a file, use the rm command. As an example, we are going to create a copy of the science.txt file then delete it.

Inside your unixstuff directory, type

% cp science.txt tempfile.txt
% ls (to check if it has created the file)
% rm tempfile.txt
% ls (to check if it has deleted the file)

You can use the rmdir command to remove a directory (make sure it is empty first). Try to remove the backups directory. You will not be able to since Linux will not let you remove a non-empty directory.

Exercise 2b

Create a directory called tempstuff using mkdir , then remove it using the rmdir command.

2.4 Displaying the contents of a file on the screen

clear (clear screen)

Before you start the next section, you may like to clear the terminal window of the previous commands so the output of the following commands can be clearly understood.

At the prompt, type

% clear

This will clear all text and leave you with the % prompt at the top of the window.

cat (concatenate)

The command cat can be used to display the contents of a file on the screen. Type:

% cat science.txt

As you can see, the file is longer than than the size of the window, so it scrolls past. You can use the vertical scroll bar to view text above, but there is a limit to how many lines are saved for scrolling.

less

The command less writes the contents of a file onto the screen a page at a time. Type

% less science.txt

Press the [space-bar] if you want to see another page, type [q] if you want to quit reading. As you can see, less is used in preference to cat for long files.

head

The head command writes the first ten lines of a file to the screen.

First clear the screen then type

% head science.txt

Then type

% head -5 science.txt

What difference did the -5 do to the head command?

tail

The tail command writes the last ten lines of a file to the screen.

Clear the screen and type

% tail science.txt

How can you view the last 15 lines of the file?

2.5 Searching the contents of a file

Simple searching using less

Using less, you can search though a text file for a keyword (pattern). For example, to search through science.txt for the word 'science', type

% less science.txt

then, still in less (i.e. don't press [q] to quit), type a forward slash [/] followed by the word to search

/science

As you can see, less finds and highlights the keyword. Type [n] to search for the next occurrence of the word.

grep (get regular expression)

grep is one of many standard Linux utilities. It searches files for specified words or patterns. First clear the screen, then type

% grep science science.txt

As you can see, grep has printed out each line containing the word science.

Or has it????

Try typing

% grep Science science.txt

The grep command is case sensitive; it distinguishes between Science and science.

To ignore upper/lower case distinctions, use the -i option, i.e. type

% grep -i science science.txt

To search for a phrase or pattern, you must enclose it in single quotes (the apostrophe symbol). For example to search for spinning top, type

% grep -i 'spinning top' science.txt

Some of the other options of grep are:

-v display those lines that do NOT match
-n precede each matching line with the line number
-c print only the total count of matched lines 

Try some of them and see the different results. Don't forget, you can use more than one option at a time, for example, the number of lines without the words science or Science is

% grep -ivc science science.txt

wc (word count)

A handy little utility is the wc command, short for word count. To do a word count on science.txt, type

% wc -w science.txt

To find out how many lines the file has, type

% wc -l science.txt

Summary

cp file1 file2	copy file1 and call it file2
mv file1 file2	move or rename file1 to file2
rm file	remove a file
rmdir directory	remove a directory
cat file	display a file
more file	display a file a page at a time
head file	display the first few lines of a file
tail file	display the last few lines of a file
grep 'keyword' file	search a file for keywords
wc file	count number of lines/words/characters in file